Views: 0 Author: Site Editor Publish Time: 2022-04-10 Origin: Site
Circular knives refer to the blade with circular edge, which is mostly used at circular and circular dents. Circular knives are widely used in various applications because of their ability to cut products. It is common to carve traditional flowers. For example, the round surfaces of flower leaves, petals and flower branches need to be shaped with a Circular knives blade. The maintenance of Circular knives blade is also a knowledge. Generally speaking, there are five key points in maintaining Circular knives blade, which will be described in detail in this article.
Check the fasteners of the Circular knives blade
Inspect the transmission chain
Lubricate the Circular knives blade
Inspect the transmission belt
Verify the operation status of the blade
To maintain the Circular knives blade, the fasteners must be inspected first to check the status of the fasteners. If the fasteners are found to fall off or loose, users should timely supplement the fasteners and tighten them firmly. In addition, check the condition of the paint and apply the paint as appropriate. The correct approach is to clean the metal paint falling off the surface of machinery and equipment before painting again.
To maintain the Circular knives blade, the second key point is to inspect the transmission chain. The correct approach is to first remove each transmission chain, then clean the transmission chain, and then carefully inspect the chain sleeve. The purpose of the inspection is to check whether each chain sleeve has cracks and other qualitative changes. If problems are found in the process of cleaning and inspection, replace the transmission chain in time.
Lubrication is the third key point of maintaining Circular knives blade. As we all know, all metal instruments should be lubricated regularly, otherwise the friction caused by the lack of smoothness during the operation of the machine will cause great damage to the metal parts. The correct way of lubrication is to complete all aspects of lubrication according to the lubrication diagram, lubrication table and diesel engine operation manual of the Circular knives blade, and then idle the diesel engine at medium and small throttle for 5 to 10 minutes.
The fourth key point of maintaining the Circular knives blade is to check the transmission belt. First, remove the transmission belt and check whether the transmission belt is slipping, burned, aged or damaged. If so, replace the transmission belt. The transmission belt shall be kept clean and coated with talc powder. It is best to install it according to the position.
Verify the operation status of the blade
The fifth key point of maintaining the Circular knives blade is to check the running state of the Circular knives blade. First, separate the moving knife from the fixed knife, clean up the residues attached between the knives, and then check the state of the blade in detail. First, check whether the riveting of the blade is loose, second, check whether the worn blade exceeds the standard, and third, check whether the cutter rod is deformed. If the riveting of the blade is loose, it shall be riveted in time. If the blade is worn out beyond the standard, it shall be replaced. If the cutter bar is deformed, it shall be calibrated in time, and then the blade shall be reassembled as required. After reassembly, the gap between moving knife and fixed knife shall be controlled within 0.2mm, and the power rod shall slide smoothly without jamming. Finally, the blade needs to be smeared with oil for antirust treatment.
Maanshan King knife Machinery Co.,Ltd is an enterprise integrating the production and repair of grinding knives. We produce many types of round knives. If you are interested in our products, please contact us for detailed information and quotation. Our contact information is: ak@kingknife.cn
